Bendix-commercial-vehicle-systems VORAD SIDE SENSOR INSTALLATION NOTE Manual do Utilizador descarregar pdf

VORAD

Integrated Side Sensor 83895-100 (supersedes part number 83222-100)

In an effort to provide our customers with the latest in technological advancements, this new sensor has

been designed to directly replace all VORAD

(square face) side sensors and now supercedes all previous

replacement sensors part numbers.

This new sensor provides the driver with an enhanced degree of view as compared to the previous sensor

design. The pulse radar technology used in this sensor also allows it to detect stationary, as well as moving

objects, in its view.

Refer to the VORAD EVT-300 Driver Instructions (VODR-0030) for complete installation and operation

instructions.

Installation Notes:

The face of the side sensor should extend a minimum of 5/32" (4mm) beyond any surrounding surfaces or

objects within 6" from the sensor to prevent false detection.

Installation Instructions (replacing older square style sensor):

1. Remove the old side sensor from the mounting bracket and inspect the harness connector for damage

or corrosion.

2. Position the new side sensor over the square cutout on the mounting bracket or side skirt. Orientate

the sensor so the writing on the face of the sensor is parallel with the ground.

3. Mark the location of the three mounting holes with a marking tool and drill using a #11 drill bit.

4. Mount sensor using hardware kit supplied. Torque mounting screws 18-22 in-lb.

Note: Do not over torque mounting hardware to prevent damage to the sensor.

5. Connect the sensor to the wire harness, making sure the connectors are clean. Lubricate the connector

seal and terminals with an approved connector dielectric lubricant*.

* Bendix Connector Lubricant (Nyogel), Part Number 5000492 [2-gram foil packet].

Bendix

™

VORAD

Collision Warning System

Integrated Side Sensor (83895-100) Installation Notes (Formerly L-2005-09)

forward collision warning system

1 2

Resumo do Conteúdo

Página 1 - Collision Warning System

VORAD® Integrated Side Sensor 83895-100 (supersedes part number 83222-100)In an effort to provide our customers with the latest in technological advan

Página 2 - Collision Warning System

Function Test: 1. Before testing the sensor, make sure the sensor has a clear view of sight out to at least a 12 ft. diameter test area. This is mos

Comentários a estes Manuais

Sem comentários

Bendix-commercial-vehicle-systems VORAD SIDE SENSOR INSTALLATION NOTE Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Equipamento Bendix-commercial-vehicle-systems VORAD SIDE SENSOR INSTALLATION NOTE. Bendix Commercial Vehicle Systems VORAD SIDE SENSOR INSTALLATION NOTE User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Bendix-commercial-vehicle-systems VORAD SIDE SENSOR INSTALLATION NOTE